English
中文简体
FrançaisProduct Consultation
Your email address will not be published. Required fields are marked *
Before installing the bathroom shower rack, adequate preparation is the key to ensure a smooth installation.
Product Inspection
Before installation, the shower rack must be thoroughly inspected. Make sure that the product packaging is intact, all accessories are complete, and check according to the product manual. Although Ningbo Domus Hardware Co., Ltd.'s products undergo strict quality inspection before leaving the factory, consumers still need to check them by themselves to prevent potential damage during transportation. This will not only improve the smoothness of installation, but also avoid possible problems in subsequent use.
Dimension Measurement
Accurate dimension measurement is the basis for successful installation. Use tools such as tape measures to accurately measure the size of the shower area to ensure that the size of the shower rack matches the installation area. At the same time, the wall condition needs to be carefully checked to ensure that it is flat and dry, and avoid installation on wet or uneven walls, which can effectively extend the service life of the shower rack.
Tool Preparation
According to the installation requirements of the shower rack, it is crucial to prepare the necessary installation tools in advance. This includes impact drills, hand drills, screwdrivers, level rulers, glass glue and glue guns, etc. Although Ningbo Domus Hardware Co., Ltd.'s product packaging usually comes with some installation tools and accessories, consumers still need to prepare additional tools according to the actual situation of their own walls to ensure a smooth installation process.
Precautions during installation
When installing the shower rack, consumers and installers need to pay special attention to the following points to ensure the quality and safety of the installation.
Positioning and drilling
According to the installation drawing of the shower rack, use a pencil to mark the drilling position on the wall. Before drilling, be sure to confirm that there are no hidden facilities such as water pipes and wires at the drilling location to avoid damage. At this stage, the detailed installation drawings and drilling guides provided by Ningbo Domus Hardware Co., Ltd. will be of great help to the installer.
Bracket installation
Knock the expansion rubber particles into the pre-drilled holes and use a screwdriver to fix the bracket of the shower rack to the wall. During the fixing process, be sure to keep the bracket horizontal and vertical to ensure that the shower rack is stable and does not shake during use. The bracket design of Ningbo Domus Hardware Co., Ltd. has been carefully considered and has good load-bearing capacity to meet the needs of most users.
Glass panel installation
Place the glass panel of the shower rack on the bracket and fix it with screws or clips. During the fixing process, ensure that the gap between the glass panel and the bracket is uniform to avoid breakage due to uneven force. The high-quality tempered glass used by Ningbo Domus Hardware Co., Ltd. has high strength and good impact resistance, but it still needs to be operated with caution during installation to ensure safety.
Debugging and inspection
After the installation is completed, the shower rack should be fully debugged and inspected. Ensure that the shower rack is installed firmly and stably without shaking or tilting. At the same time, check whether the connection between the glass panel and the bracket is tight and there is no gap. Although Ningbo Domus Hardware Co., Ltd.'s products are strictly debugged and tested before leaving the factory, consumers still need to check by themselves after the installation is completed to ensure that the installation quality meets the expected standards.
