English
中文简体
FrançaisProduct Consultation
Your email address will not be published. Required fields are marked *
The installation of the toilet paper towel holder is an important part of ensuring its function and use effect. Reasonable location selection and correct installation steps can ensure the stability and convenience of the paper towel holder and enhance the user experience.
When choosing the installation location of the paper towel holder, the first thing to consider is the height of the paper towel holder. According to the user's height and usage habits, the installation height of the paper towel holder should be equivalent to the user's arm level, so that the user can easily access the paper towel. At the same time, the paper towel holder should be installed in a location that is easy for the user to reach, usually near the sink or in the common area of the bathroom. Avoid installing the paper towel holder near the water source to prevent the paper towel from getting wet or splashed by water.
In the correct installation steps, first prepare the necessary tools, such as screwdrivers, electric drills, and wall screws. Use a ruler to measure the installation location of the paper towel holder and mark it on the wall. According to the marked location, use an electric drill to drill a hole in the wall, and the depth of the hole should be suitable for the length of the wall screw. Then insert the wall screw into the drilled hole and fix it to the wall with a screwdriver. Make sure the wall screw is firm and stable. Finally, match the fixed part of the paper towel holder with the wall screw, insert it into the wall screw, and fix it with a screwdriver. After installation, shake the paper towel holder vigorously to ensure its stability and safety.
In addition to the above basic installation steps, you also need to pay attention to the following points:
1. The fixed part of the paper towel holder should be parallel to the wall to avoid affecting the use of paper towels.
2. Use suitable wall screws and avoid using screws that are too long or too short.
3. Ensure the flatness of the wall. If the wall is uneven, you can use gaskets to adjust it.
4. If the weight of the paper towel holder is large, you can use chemical glue and other fixing materials to increase stability.
After installation, you also need to check the stability and safety of the paper towel holder. If you find any loose or unstable places, you need to adjust and fix them in time.
